Follow these simple steps to configure a virtual scanner appliance using VMware Workstation, Player, Workstation Player, Fusion, ESXi or vCenter Server. Once you've successfully configured your scanner it'll be ready for scanning.
These instructions assume that you've already 1) downloaded the virtual scanner image file and 2) obtained a personalization code.
We recommend you review these requirements. 1) The local network must be configured to allow outbound HTTPS (port 443) access to the Internet, so that the virtual scanner can communicate with the Qualys Cloud Platform. While conducting a scan the virtual scanner sends probes to the target assets (hosts and/or web applications). 2) The virtual scanner must be placed in the network in such as way that assets to be scanned are accessible to the virtual scanner.
Step 1: Start the virtual scanner machine
You’ll see the Virtual Scanner Console that you’ll use to configure and activate your virtual scanner. Start the virtualization platform and open the downloaded image file. Now power on the virtual machine. By default the memory is set to 2048 MB, and under Network Adapter > Network connection the Bridged option is selected (these are recommended settings).
Step 2: Press the Right arrow to select “Personalize this scanner”
The virtual scanner will use DHCP without proxy configuration, unless you make custom settings first.
For custom configuration: Go to “Set up network” by pressing the Down arrow one time and then the Right arrow one time. See instructions below for help with static IP and proxy configuration. After choosing settings, use the Up/Down arrows to navigate to “Personalize this scanner” and then press the Right arrow.
Step 3: Enter your personalization code
One activation code may be used to activate one virtual scanner. After entering the code the activation process starts and the service reports the progress. Activation may take a few minutes to complete.
Step 4: Wait until activation completes
The virtual scanner attempts to make a connection to the Qualys Cloud Platform using its current configuration (network and proxy settings). Upon success, the scanner's friendly name and IP address appear and the scanner is ready to be used for scanning. Press Enter to go to the main menu.
Want to customize your configuration?
If you wish to enable a static IP address, go to the main menu and select “Set up network (LAN)”, press the Right arrow to highlight “Enable static IP config on LAN" and then press the Right arrow.
How to enter settings: Press Up and Down arrows to select input fields. Press the Right and Left arrows to scroll within a field. When you are done, select the last item, for example “Configure static IP address on LAN?”, and type “Y” to confirm (or type “N” to cancel).
Additional configurations: There are additional configurations that you can choose. These may be required to successfully connect to the Qualys platform.
Enable VLAN on LAN. Select this if you have connected the LAN interface to a 802.1q trunked port and need your virtual scanner to use VLAN tags on the LAN default network. Enter the VLAN tag number (1-4094) to use.
Enable WAN interface. By default the LAN interface services all network traffic. By selecting this option, all software updates and health checks are routed through the WAN interface and scanning traffic is routed through the LAN interface.
Enable proxy. Select this option to enter a proxy server configuration, with or without authentication (Basic or NTLM). The proxy server must allow transparent SSL tunneling.
Still have questions?
Check out our Scanner Appliance FAQs.