How to check scanner appliance capacity

Document created by Qualys Documentation Employee on Oct 25, 2012Last modified by Qualys Documentation Employee on Nov 30, 2012
Version 7Show Document
  • View in full screen mode

Scanner appliance capacity information is provided to help you better understand which of your scanner appliances get the most use and which appliances are currently available for scanning.

 

How do I see the available capacity for an appliance?

Go to Scans > Appliances. Click the row for the scanner appliance you're interested in and take a look at the preview pane. The preview pane shows the Available Capacity for the appliance, expressed as a percentage. For example, Available Capacity: 82% means the appliance is using 18% of its capacity and 82% of its capacity is currently available.

 

available_capacity.jpg

 

How do I see how much capacity the appliance typically uses?

Go to Scans > Appliances. Select Info from the Quick Actions menu for the appliance you’re interested in. The Scanner Appliance Information window appears with a Scanner Capacity chart.

 

scanner_capacity_chart.jpg

 

The scanner capacity chart shows the capacity of the appliance over the last 7 days, calculated in 15 minute increments. Place your cursor over any point in the chart to see the used capacity for that moment in time, expressed as a percentage. For example Used Capacity: 18% means the appliance used 18% of its capacity and 82% of its capacity was available at that time. You'll see the date and time the capacity was calculated.

 

Tell me more about the capacity trend calculation

A trend line shows you the capacity trend, calculated in 6 hour intervals. Every 6 hours the service takes an average of the used capacity and shows this in the middle of a 6 hour window. For example, for the period 3pm to 9pm the average appears at 6pm. Average over 6 hours: 10% means the average of the used capacity was 10% and 90% of its capacity was available over the 6 hour window.

 

I don't see capacity information. How come?

New Scanner Services must be enabled for the subscription to see scanner appliance capacity information. Go to Help > Account Info > General Information to see whether your subscription has been configured (enabled) for New Scanner Services.

Attachments

    Outcomes